Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Tools
The 2197 is an add-on accessory for the Park Tool DT-5 and DT-5.2 Disc Brake Mount Facing Set to enable easier and more efficient facing of disc brake mounts on carbon fiber frames. Features a brazed-on diamond grit surface that is over 100 times more durable and effective on carbon fiber than the cutter included with the DT-5.2. The 2197 sits between the cutter of the DT-5.2 and the brake mount, and smoothly and evenly grinds the mounting surface until it is flat and properly perpendicular to the rotor.
NOTE: The 2197 is intended for facing carbon fiber only. Aluminum, steel, and titanium disc brake mounts should be faced using the #2171 facing cutter included with the DT-5.2. For carbon frames that feature aluminum inserts (with a carbon/aluminum hybrid mounting surface), use the #2197. When machining carbon fiber, regularly apply water (or a similar solution) to the cutting surface.
Park Tool's Fork Threading Set is designed for cutting new threads and for chasing existing threads on fork columns that are not chromed. The FTS-1's expandable cutting dies are made from the highest quality high-speed steel for precision cutting and long life. The unique thread guide system used with the FTS-1 is specially designed to allow the metal chips and shavings that result during use to fall completely through the guide, preventing damage to the fork threads and the tool.
The FTS-1 includes:
• Die handles
• 1" x 24 tpi cutting die (Part #606)
• 1" cutting guide (Part #610)
Accessory dies and guides are also available separately:
• 1-1/8" x 26 die (Part #607)
• 1-1/8" guide (Part #611)
• 1-1/4" x 26 die (Part #608)
• 1-1/4" guide (Part #612)
Die handles fit all three sizes of dies and guides.
This combination chain whip and freewheel / lockring remover wrench is heat treated to prevent bending and flexing, with a molded handle for comfort.
- 1/8-inch model works on 1/8-inch chains and sprockets
- 1-inch (25.4mm) box-end wrench fits Park Tool Freewheel/Cassette Lockring Tools
- Features hardened pins to keep the chain in place
Replacement pins for Pedro's Pro Chain Tool, Pro Chain Tool 2.0, and Apprentice Chain Tool
- Includes two replacement pins
For use in conjunction with our reaming pedal taps, this thread insert is held in place with a strong thread locker and allows you to install any standard pedal.
- Pack of 10, fits 9/16" pedals.
- Pedal thread inserts are used to replace damaged threads in cranks
$0.94
This is a single replacement pin for Park Tool HCW-4 and SPA-6 pin spanner wrenches.
$2.48
- Compatible with 5-12 speed; 3/32" and 1/8" single speed chains
- Features a Smart Cradle System which is adjustable, use with almost all chains
- Full aluminum construction with S2 steel pin
$3.99
- Microcell is ergonomically contoured for maximum comfort and surface area
$4.00
Designed to fit snugly between the disc brake caliper pistons or pads, preventing inward pad movement to preserve hydraulic brake adjustment while the wheel is off the bike..
- For disc caliper repair
- Fits SRAM Guide, Trail, and Avid Code Brakes
$4.00
Getting a flat is a pain in the butt. It's an even bigger pain in the butt if you don't have the stuff you need to get back home. These patches will help get you back to where you need to be.
- Six patches
- Sandpaper
- Instructions included
$4.00
Refill pack for the Park Tool TPT-1 Tubeless Plug Tire Tool and other similar tools. These vulcanized rubber plugs are used to temporarily repair punctures in tubeless bicycle tire systems. Set of 5.
NOTE: Intended for tubeless bicycle tires using sealant only. Not compatible with inner tube systems.
$4.00
Tools for repair and maintenance of RockShox Reverb suspension seatposts.
- Specific to RockShox Reverb post
$4.00
To adjust preload on Hollowtech II cranksets
$4.95
Get those heads sealing like new and reduce compressor energy waste with Park Tool's Head Seal Kit. This kit will help get rid of that hissing sound you've been hearing when it has been too long since servicing your Park Tool INF-1 or INF-2 shop inflator.
Kit includes:
- 1 #1586 Presta Seal
- 1 #1588 Schrader Seal
- 2 #1576-2 O-rings for Shuttle-valve
- 1 #1682-2 O-ring for INF-1 and INF-2 Head Adaptors
$4.95
• Updated with a new material and new design
• Features a wide flat tip for easy entry and fast tire removal, ergonomic shape and a handy spoke hook when multiple levers are needed
• Perfect for tight beads and tubeless tires
• Sold in sets of two.
$4.99
- Tire plug refill pack for Crankbrothers Cigar Tool Plug Kit + CO2 Head
$4.99
Lezyne's Power Tire Levers are winning the fight against stubborn tires. They're made of a high-strength composite material for excellent strength and durability. Their thin hook ends easily slip under tight beads, while the large handle gives you the leverage needed for tire removal. On the backside, there is a hook to attach the lever to a spoke for added versatility.
$4.99
- Don't get stranded. Pack of tire plugs for use with Tubeless Kit or Classic Tubeless Kit
- Also available in a pack of 20
$5.00
Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools.
• Made from hardened alloy tool steel
• Uses 7mm or 9/32" 12 pt box end/socket
• Sold singly or in pairs
$5.90
Park Tool's Pump Rebuild Kit contains one #1081 head as well as one #1087 plunger gasket for their PFP-3, PFP-6 and PFP-8 floor pumps.
$5.95
Park's Chainring Nut Wrench makes chainring bolt installation and removal easy. It securely holds the slotted nut to prevent spinning when tightening or loosening the bolt. And, it's double-ended to fit most slotted-type nuts, including Campagnolo chainring bolt nuts.
$5.95
This dual-sided brush is specifically designed for cleaning hard-to-reach areas of the bicycle drivetrain. The long, stiff bristles of the GSC-3 are narrow enough to reach between the gears of tightly-spaced modern cassettes, while the slim contoured end is capable of picking grit and grime out of tight spaces such as derailleur pulley wheels.
$5.95
Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.
$5.95
Park's Hex Wrenches are every mechanic's best friend. They are constructed from industrial quality steel for durability and feature chamfered tips for a precision fit. And, their convenient L shape is perfect for jobs that require lots of leverage or for getting to hard-to-reach bolts.
Page 1 of 28
Next page