Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Fenders

$1.99
Holds stainless steel stay rods to fender Contains: - (1) Eyelet bolt - (1) 10mm lock nut - (1) Rubber cap Compatibility: - All Hardcore, SpeedEZ, Cascadia, Cascadia ALX, & Grasshopper fenders
$2.50
The Hardcore Fender Hardware Kits are compatible with select Hardcore fenders, Full Fenders, Hardcore Recumbent Fenders, and SpeedEZ fenders. Includes: - Rear fender plastic clip - Fork and brake bridge-thru bolts - Stay bolts and lock washers Specific compatibility w/Planet Bike fenders: - 35mm Width: 700c x 35mm Fenders (Hardcore) - 45mm Width: 700c x 45mm (Hardcore, Full, and SpeedEZ); 700c Rear (Hardcore Recumbent) - 60mm Width: 26-inch x 60mm (Full, SpeedEZ, and Hardcore)
$2.50
Compatible with SpeedEZ fenders: - 26-inch x 60mm - 700c x 35mm - 700c x 45mm
$3.99
- 8 rubber fender stay caps - Compatible with all Hardcore, SpeedEZ, Cascadia, Cascadia ALX, and Grasshopper fenders
$6.95
Topeak's MTX DeFender is the perfect addition to your RX BeamRack. It clips seamlessly to the rack and provides valuable protection against moisture and trail grime.
$6.99
- Releases front fender stays if debris is present in between fender and tire - Fits current and past Grasshopper, Cascadia ALX, Cascadia and Hardcore front fenders (not recommended for non-Planet Bike fenders)
$7.39
•Steel •Chrome Plated •Front or Rear •Cruiser •26-inch x 75mm
$7.99
- Rubber straps - Fit Raceblade, Mud-x - Set of 8
$9.99
The Cascadia Fender Hardware Kits are compatible with Cascadia fenders, Hardcore fenders, and Full fenders. Includes: - Rear fender plastic clip - Fork and brake bridge-thru bolts - Stay bolts and lock washers - Disc adaptor spacers (60mm & 65mm widths only) Specific compatibility w/Planet Bike Fenders: - 35mm Width: 700c x 35mm Fenders (Cascadia & Hardcore) - 45mm Width: 700c x 45mm Fenders (Cascadia, Hardcore, and Full) - 60mm Width: 26-inch x 60mm Fenders (Cascadia & Hardcore) - 65mm Width: 29-inch x 65mm (Cascadia)
$9.99
- Spoiler/lower fender - 35mm fits 35 Chromoplastics, Commuter II & Raceblade fenders - Hardware included
$9.99
- Spoiler, 50/55mm fits Chromoplastics, Commuter II - Hardware included.
$9.99
- Spoiler, 65mm fits Chromoplastics, Commuter II - Hardware included.
$9.99
X-Long Mudflap/Spoiler can be retrofitted to any fender profile of the correct size. A hole may need to be drilled in the profile if one isn't already there. - Adds 6 inches of coverage to any fender profile - 35mm size fits fender profiles up to 35mm - 53mm size fits fender profiles 46mm-55mm
$9.99
The X-Long Spoiler is designed to add extra coverage to SKS fenders. - Compatible with 45mm versions of the Chromoplastic, Commuter II, Long Board and Raceblade fender models - Easily mounted by consumer with included hardware - Sold as Each
$10.99
Keep water and mud off you with SKS's Mud-X down tube fender! This versatile fender works with most bikes regardless of wheel size.
$10.99
- Velo 55, 20 inch U-Stay Set - Optional U-Stay Kit for Rigidity - Includes U-Stay for front and rear + necessary hardware
$10.99
- Velo 55, 24 inch U-Stay Set - Optional U-Stay Kit for Rigidity - Includes U-Stay for front and rear + necessary hardware
$10.99
Addd an extra dose of stability to SKS's Velo 42 and Velo 47 fenders. A stainless steel U-stay mounts to the fenders and your frame eyelets to eliminate rattling and bouncing fenders.
$10.99
Addd an extra dose of stability to SKS's Velo 55 fenders. A stainless steel U-stay mounts to the fenders and your frame eyelets to eliminate rattling and bouncing fenders.
$10.99
Addd an extra dose of stability to SKS's Velo 65 fenders. A stainless steel U-stay mounts to the fenders and your frame eyelets to eliminate rattling and bouncing fenders.
$11.99
- Guards against mud - Made from 100% recycled plastic waste - 100% recyclable - Supplied with 4 zip ties - Made in England
$11.99
The S-Guard is not just for road bike cyclists; this super-lightweight (24g) and small mudguard protects your bottom from mud and water. Made with super-soft material, it fits on nearly every saddle with the addition of a cable tie.
$12.99
A simple plastic fender that can be used on either the front or rear of the bike with styling to match your ride. - Available in multiple colors - Made in the USA
$12.99
Planet Bike's Grunge Board is an easy-to-mount front fender that keeps you dry and clean when it's wet and muddy. It's made from a nearly indestructible polymer and it mounts in seconds to your down tube with the 2 rubber straps.
$12.99
FENDER EXTENSION FOR EVEN MORE PROTECTION Fender extension for even more protection A clean affair: With the spoiler made of flexible plastic, the SKS BLUEMELS and EDGE AL mudguards can be extended by up to 137 mm. The extension is suitable for all angular mudguard profiles with widths of 46, 56, 65, 69, and 75 mm and provides even better protection against splash water. Simple and secure attachment If a USC plug is already installed at the end of the mudguard (approx. 40 mm), this can be used for attachment. Otherwise, only two holes are required for assembly - no problem, thanks to the enclosed drilling template. The flexible spoiler is then pushed onto the end of the rear and front wheel mudguard and mounted with a clip and two lock washers. - For SKS mudguards - Suitable for all angular mudguard profiles - Made of flexible, soft plastic - Extends the mudguard by up to 137 mm - Made in Germany
$12.99
The Mudrocker Rear Extender can be snapped on and used for extra protection in the bottom bracket/derailleur area. This item is included with the Mudrocker Rear Fender, but we offer it here as a replacement. - Made in Germany
$12.99
Shockboard / Shockblade & Dashboard hardware kit (for 2nd bike)
$13.00
Easy to install and available in various colors and designs, the Splash Pad Front Fender won't let wet weather spoil your ride. It's designed for use with a range of bicycle styles and compatible with suspension forks. - A low-profile, easy-install fender that keeps riders clean in various conditions - Fits wide range of wheel sizes - Tool-free installation - Zip ties not included. Color zip tie options available through Problem Solvers.
$13.00
Easy to install and available in various colors and designs, the MSW Splash Pad Rear Fender won't let wet weather spoil your ride. It's designed for use with a range of bicycle styles and is compatible with standard saddle rail configurations. - A low-profile, easy-install fender that keeps riders clean in various conditions - Fits wide range of wheel sizes - Tool-free installation - Zip ties not included. Color zip tie options available through Problem Solvers.
$13.99
Lightweight and stealthy, Muc-Off Ride Guards keeps mud fling to a minimum. - Guards against mud - Made from 100% recycled plastic waste - 100% recyclable - Supplied with 4 zip ties - Made in England
Page 1 of 6 Next page